1. January 1, 1999, Goal Searchers Co.,Ltd Zhuhai(GSH) was established Cuijing Industrial Zone, Qianshan, Zhuhai.

2. December 2000, China’s first Non-Woven Buff was researched successfully and put into massive production.

3. March 2001, GSH joined in Shanghai CPCA Show first time, then acquired Non-Woven Buff PO from Compeq(Huizhou) , Plato Electronics and other

 customers.

4. December 2001, Nylon Bristle Brush (include Pumice Brush)were researched successfully and put into massive production.

5. January 2002, world’s first PCB Sampler was researched successfully and got acceptance by Multek China Limited.

6. March 2002, GSH started to produce high precision rubber roller and sponge rollers.

7. May 2002, China’s first Optical Glass for Exposure Machine for PCB industry was researched successfully and got acceptance by Multek China Limited, Multek Technology (Zhuhai)Co., LTD and other customers.

8. July 2002, China’s first Hi-Cut Buff(Flap Type) was researched successfully and put into massive production.

9. October 2003, GSH joined in HKPCA membership.

10. September 2004, China’s first Hi-Cut Buff(Convolute Type) was researched successfully and put into massive production.

11. January 2005, GSH got SGS ISO 9001 certificate of quality management system.

12. February 2005, GSH got Little Pine Tree trademark registration certificate.

13. November 2005, China’s first Auto Heavy Brushing Machine was developed successfully and got acceptance by MFS.

14. January 2006, GSH promoted support plan of down payment for backbone in whole company.    

15. September 2006, Ceramic Brush was researched successfully and put into massive production.

16. November 2007, GSH joined in CPCA membership.

17. February 2008, China’s first brushing line for PCB industry was established in Zhuhai.

18. July 2008, Copper Filter was researched successfully, at the same month, all types of GSH brushes acquired SGS RoHS certificate.

19. November 2009, GSH trademark certificate was issued.

20. February 2010, China’s first Auto Heavy Brushing Machine was researched successfully and got acceptance by ACCESS. At the same month, GSH

joined in TPCA membership.

21. May 2010, the first Upper Scrubbing Sand Belt Machine was researched successfully and put into use.

22. November 2010, China’s first generation Vacuum Plugging Machine was researched successfully and put into use in Zhuhai plugging line.

23. December 2010, China’s first foaming Non-Woven Buff was researched successfully and put into massive production.

24. February 2011, China’s first High Density Bristle Brush and Auto Sand Belt Machine were researched successfully.

25. April 2011, China’s first Auto Heavy Brushing Machine for Thick Panel was researched successfully and got acceptance in Corad Zhuhai.

26. January 2012, GSH got Best Service Award of year 2011 from ACCESS Zhuhai.

27. May 16, 2012, GSH Vacuum Plugging and Brushing line in Suzhou was opened.

28. January 2013, GSH got Technical Support Award of year 2012 from ACCESS Zhuhai.

29. March 2013, Auto Heavy Brushing Machine(Single Brush and Double Brushes) for Thin Panel(0.05mm) was researched successfully.

30. July 2013, Auto Heavy Brushing Machine (Four Brushes) for Think Panel (12mm) was researched successfully.

31. July 2013, the second generation Vacuum Plugging Machine was researched successfully.

32. August 2013, GSH got certificate of Safety Production Standardization.

33. November 2013, Auto Heavy Brushing Machine (Double Brushes) for Thick Panel(12mm) was researched successfully.

34. December 18, 2013, GSH Vacuum Plugging and Brushing Line in Shenzhen was opened.

35. December 23, 2013, GSH passed acceptance of ISO14001:2004 management system in design and manufacture of PCB Non-Woven Buff,

Nylon Bristle Brush, Ceramic Brush and Brushing Machines.

36. February 2014, Auto Light Brushing Machines (Four Brushes) was researched successfully.

37. March 2014, Lower Scrubbing Sand Belt Machine for PCB manufacture was researched successfully.

38. June 2014, GSH passed acceptance of ISO9001:2008 management system in design and manufacture of PCB Non-Woven Buff, Nylon Bristle Brush, Ceramic Brush and Brushing Machines.

39. September 2014, 1350mm width Auto Sand Belt Machine for CCL manufacture was researched successfully.

40. September 2014, the third generation Vacuum Plugging Machine was researched successfully.

41. December 2014, Smart 3-axis Robot Loader/Unloader was researched successfully.

42. April 2015, world’s first 650mm Auto Double-Sided Sand Belt Machine for PCB manufacture was researched successfully.

43. May 1, 2015, GSH initiated PCB industry standards of <Brush for PCB Manufacture: Non-Woven Buff> and < Brush for PCB Manufacture:

Ceramic Brush> which were published officially.

44. May 2015, Auto Middle Brushing Machine for Thick Panel (12mm) was researched successfully.